Bidding Information

Description:
The Bidder, or its sub-contractors, shall be classified by the State of New Jersey – Division of Property Management and Construction in the following classification:

C009 General Construction/Alterations & Additions
The Bidder shall further name and include all required pre-qualification information for the following Subcontractors
C029 Structural Steel and Ornamental Iron
C030 Plumbing*
C032 HVACR*
C047 Electrical*
*Copy of licenses must be included with bid

i. General Construction, including, but not limited to
1. Selective demolition responsibilities included within the scope of the pro-ject shall include the following Demolition of construction designated and required to accommodate the new work, including finished ceilings, non-asbestos containing floor finishes, doors, door frames as noted, toilet parti-tions, accessories and related equipment designated.
a. Demolition of construction designated and required to accommodate the new work, including finished ceilings, non-asbestos containing floor finishes, doors, door frames as noted, toilet partitions, accesso-ries and related equipment designated:
b. Existing masonry construction as indicated and as required to ac-commodate the scope of the work proposed.
c. Removal of wall mounted equipment and furnishings as designated and required to complete the scope of the proposed work
d. Preparation of existing masonry wall and substrates as required to accommodate the proposed construction.
e. Removal of existing ceiling systems, and repair, patching and prepa-ration of existing construction designated to remain as required to accept the specified finishes.
f. Removal and restoration of acoustical panel ceiling systems, includ-ing coordination and sequencing of the work with the owner and other contractors.
g. Patching of building finishes damaged or altered as a result of the work of this contract
h. Patching and repair of roofing finishes.  The contractor is advised that roof areas impacted by the work of this contract are under war-ranty.  Repairs and alterations to these roof systems must be per-formed in strict conformation with the written requirements of the roofing system manufacturer, and performed by a roofing contractor pre-qualified by the roofing system manufacturer.
i. Cutting, patching and restoration of existing interior and exterior fin-ishes to the extent required to accommodate the work of this con-tract.
2. Masonry construction where shown and as required to infill abandoned or altered door openings.
3. Painting of walls and door frames, including preparation of all surfaces to be painted.
4. Supply and installation of new doors, door frames and hardware as shown and indicated within the Contract Documents.
5. Supply and installation of new VCT floor finishes, including vinyl wall base and vinyl transition strips and reducers where flooring abuts adjacent floor finishes, including concrete and terrazzo finishes.
6. Supply and installation of new display boards, tack and marker boards indicated.
7. Supply and installation of new ceiling systems, and preparation for the in-stallation lighting fixtures and other ceiling mounted devices.
8. Supply, fabrication and installation of new stainless steel food service equipment casework detailed within the construction documents.  The General Contractor shall retain the services of a qualified Food Service Contractor for the preparation of detailed shop drawings, as well as the fabrication, delivery and installation of all materials specified.  This Con-tractor shall be named within the Form of Bid.
9. Preparation for new floor and wall base finishes.
10. Supply and installation of new interior signage indicated.
11. Roof cutting, patching and restoration to the extent required to accommo-date the work of this contract.  Refer to the Mechanical, Plumbing and Electrical drawings for the extent of new openings, penetrations, curbs and pipe supports requiring cutting and restoration of new warrantied roofing system.

ii. Structural Steel Construction, including, but not limited
1. Miscellaneous steel framing and lintels as required to support and accom-modate new and enlarged or altered door openings, new or relocated me-chanical systems and roof openings.

iii. Mechanical Work, including, but not limited removal of existing mechanical systems as indicated and required, supply and installation of new exhaust fans, duct work and diffusers, renovation of the existing exhaust systems, modifica-tion of existing roof curbs and supports systems as indicated and required, in-stallation of new transfer grilles and fire dampers, supply and installation of new cabinet unit heaters including new hot water supply and return piping. and relo-cation of existing mechanical work but in conflict with new construction pro-posed as a part of this contract.  Equipment will be integrated into the BMS by the Owner’s integration Contractor (AME Inc.).

iv. Plumbing Work, including, but not limited removal of existing plumbing systems and fixtures as indicated and required, supply and installation of new water ser-vice, drainage systems and fixtures, and relocation of existing plumbing work designated to remain but in conflict with new construction proposed as a part of this contract, and supply and installation of new plumbing services shown and required for a complete operating system.

v. Electrical Work, including, but not limited removal of existing electrical systems as indicated and required, supply and installation of new electrical systems, de-vices, lighting fixtures and accessories, relocation of existing electrical work in designated to remain but in conflict with new construction proposed as a part of this contract, and supply and installation of new electrical services shown and required for a complete operating system.  Operating systems shall include all mechanical and plumbing systems, electrical operators and controls, and equip-ment scheduled to be provided as a part of this contract as well as under the scope of a separate contract(s).

2. RESPONSIBILITIES OF THE OWNER:
a. Removal of all furnishings or loose equipment as required to accommodate the scope of this contract prior to the start of work and subsequent reinstallation of furnishings after final completion.
b. Access to standard single phase electrical service for light power equipment and tools required to perform the work.  The contractor shall be responsible for the supply of temporary generators for three phase electrical service when and if required.
c. Provisions for access to the work area.

Addenda:
Question deadline is 5:00 PM Wednesday, February 18, 2026, and an addendum will be issued on or before Thursday, February 19, 2026.

Bid Submission/Deadline

Bids Due By: Tuesday, March 3, 2026 at 1:00 PM

Submit Bids to:
Lenape Regional HSD Board of Education
93 Willow Grove Road
Shamong, NJ 08088
Phone: 609-268-2000

Bid Results

Legend

• GC - General Contractor
• P - Plumbing
• E - Electrical
• SS - Structural Steel
• V - Vendor
• HVAC - Heating, Ventilating, AC
• RS - Reporting Service
• SW - Site Work
• F - Furniture
• LS - Lump Sum