Bidding Information

Description:
1. CONTRACT FOR MECHANICAL CONSTRUCTION – PROJECT DELINEATION.  The scope of the work of the different projects within this bid are as follows.  Refer to Architectural Drawing A1.0, “General Notes and Schedules” for a delineation of the areas included within each project referenced below:

LHS PHASE 2 HVAC-B (LHS-13 BAND ROOM)
2. CONTRACT FOR MECHANICAL CONSTRUCTION – GENERAL REQUIREMENTS
a. General Coordination responsibilities including the following:
1) Coordination of the work with other prime Contractors active on the project site.  Other Contractors shall act in accordance with the schedule dictated by the Owner, and shall coordinate all construction activities through the General Contractor and Owner, as agreed and accepted by the Owner and Architect.
b. Selective demolition responsibilities included within the scope of the project shall include the following:
1) Removal of wall mounted equipment and furnishings as designated and required to complete the scope of the proposed work
2) Repair, patching and preparation of existing ceiling construction as required to accommodate the proposed construction, and as required to accept the specified finishes.
3) Removal and relocation of existing electrical, plumbing and mechanical systems indicated and required for the performance of the proposed work.
c. Supply and installation of steel roof frames and supports as required to accommodate the proposed mechanical construction.  Note that the conditions vary at each area, and are to be field verified.
d. Removal and restoration of acoustical panel ceiling systems, including coordination and sequencing of the work with the owner and other contractors.
e. Patching of building finishes damaged or altered as a result of the work of this contract
f. Patching and repair of roofing finishes.  The contractor is advised that roof areas impacted by the work of this contract are under warranty.  Repairs and alterations to these roof systems must be performed in strict conformation with the written requirements of the roofing system manufacturer, and performed by a roofing contractor pre-qualified by the roofing system manufacturer.

SHS-PHASE 2 HVAC-B (SHS-06 WOOD SHOP, SHS-22 DUST COLLECTION SYSTEM),
3. CONTRACT FOR MECHANICAL CONSTRUCTION – GENERAL REQUIREMENTS
a. General Coordination responsibilities including the following:
1) Coordination of the work with other prime Contractors active on the project site.  Other Contractors shall act in accordance with the schedule dictated by the Owner, and shall coordinate all construction activities through the General Contractor and Owner, as agreed and accepted by the Owner and Architect.
b. Selective demolition responsibilities included within the scope of the project shall include the following:
1) Removal of ceiling mounted air handling equipment, ductwork, supports, hangers, accessories, and as delineated within the contract mechanical drawings, and designated and required to complete the scope of the proposed work
2) Repair, patching and preparation of existing ceiling construction as required to accommodate the proposed construction, and as required to accept the specified finishes.
3) Removal and relocation of existing electrical, plumbing and mechanical systems indicated and required for the performance of the proposed work.
c. Removal and replacement of the existing dust collection system in its entirety.  The scope of the work will include patching of existing roof and roof coating systems, as well as interior and exterior masonry wall finishes.  Supply and installation of steel roof frames and supports as required to accommodate the proposed mechanical construction.  Note that the conditions vary at each area, and are to be field verified.
d. Patching of building finishes damaged or altered as a result of the work of this contract.  Patching shall include, but is not limited to masonry alterations and renovations, and painting of renovated, modified or altered wall and ceiling surfaces.
e. Patching and repair of roofing finishes.  The contractor is advised that roof areas impacted by the work of this contract are under warranty.  Repairs and alterations to these roof systems must be performed in strict conformation with the written requirements of the roofing system manufacturer, and performed by a roofing contractor pre-qualified by the roofing system manufacturer.

CHS-PHASE 2 HVAC-C (CHS-14 WOOD SHOP, CHS-36 DUST COLLECTION SYSTEM)
4. CONTRACT FOR MECHANICAL CONSTRUCTION – GENERAL REQUIREMENTS
a. General Coordination responsibilities including the following:
1) Coordination of the work with other prime Contractors active on the project site.  Other Contractors shall act in accordance with the schedule dictated by the Owner, and shall coordinate all construction activities through the General Contractor and Owner, as agreed and accepted by the Owner and Architect.
b. Selective demolition responsibilities included within the scope of the project shall include the following:
1) Removal of ceiling mounted air handling equipment, ductwork, supports, hangers, accessories, and as delineated within the contract mechanical drawings, and designated and required to complete the scope of the proposed work
2) Repair, patching and preparation of existing ceiling construction as required to accommodate the proposed construction, and as required to accept the specified finishes.
3) Removal and relocation of existing electrical, plumbing and mechanical systems indicated and required for the performance of the proposed work.
c. Removal and replacement of the existing dust collection system in its entirety.  The scope of the work will include patching of existing roof and roof coating systems, as well as interior and exterior masonry wall finishes.  Supply and installation of steel roof frames and supports as required to accommodate the proposed mechanical construction.  Note that the conditions vary at each area, and are to be field verified.
d. Patching of building finishes damaged or altered as a result of the work of this contract.  Patching shall include, but is not limited to masonry alterations and renovations, and painting of renovated, modified or altered wall and ceiling surfaces.
e. Patching and repair of roofing finishes.  The contractor is advised that roof areas impacted by the work of this contract are under warranty.  Repairs and alterations to these roof systems must be performed in strict conformation with the written requirements of the roofing system manufacturer, and performed by a roofing contractor pre-qualified by the roofing system manufacturer.

Addenda:
If necessary, an addendum will be issued on or before Friday, January 20, 2023

Bid Submission/Deadline

Bids Due By: Friday, February 3, 2023 at 10:00 AM

Submit Bids to:
Lenape Regional High School District Board of Education
93 Willow Grove Road
Attn: Ms. Kara Huber, Business Admin./Board Secretary
Shamong, NJ 08088
Phone: (609) 268-2000

Bid Results

None listed at this time.